Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor

Cheap Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Review

If you need to cut expensive veneered sheet goods with a hand circular saw, this is the blade to get. It's pricey, but it's the only one I've used that doesn't produce splintering or tear-out in the material.

Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Feature

• 20° Face Hook for easy feed
• DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
• Ends second-step finishing (jointing and sanding not required).
• Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
• Ends cutting 1/16" oversize to allow for RESURFACING

Forrest DH07Q607100 Duraline 7-1/4-Inch 60 Tooth TCG Melamine and Plywood Cutting Saw Blade with 5/8-Inch and Diamond Knockout Arbor Overview

For radial saws and table saws. These all purpose blades give scratch-free polished cuts on wood. Crosscut up to 2" thick. Rip up to 1" thick. They have a 30 DEG alternate top bevel with a 5 DEG face hook on 10" diameters and smaller. (On 12" diameters and larger 20 DEG ATB). They are also made with double-hard and 40% stronger #C4 carbide. Thin kerf design saves 1/3 wood loss on each cut, feeds easily when used for moderate rips and crosscuts on a table saw. Eliminates bottom splintering on radial crosscuts. With the new 30 DEG ATB tooth style, this blade stops splintering on ply veneers on both radial saws and table saws.



*** Product Information and Prices Stored: Apr 02, 2010 15:13:28